Hi I have a sony UP-DR150 and seem to be having a problem. If I install the driver and plug the printer in it works fine. Once I switch everything off and go back to it on another day, start everything up and try to print, it hold the print job in the print queue and does not a print at all. Windows 10 might ask you for permission to install. Allow the driver manufacturer to make changes to your PC. The driver will now install and your printer will be ready for use following installation. Sony UP-DR150 Digital Photo Printer Driver for Windows 2000/XP 32-bit and Windows Vista/7 32/64-bit.
*If you use Windows Vista, please refer to this FAQ.
*Remarks at installing the printer driver by using equipped installer in each languages
The installer (software for application set up) can work properly only on the following language version of Windows (2000):
- - Chinese (simple), English, French, German, Italian, Japanese, Spanish
If you need to install the driver into any other supported languages of Windows (2000),
please use PnP (Plug and Play: automatic setting system without manual setting) installation method.
The PnP installation method can be referred to the section, 'Installing Driver for Additional Printers',
in the Printer Driver Installation Guide which is found in the CD-ROM bundled with the printer.
For specifying an extract folder of a compressed file
- 1. Double click the downloaded compressed file, then the dialog 'WinZipSelf-Extractor' comes up.
- 2. Specify the destination of the decompressed files on 'Unzip To Folder.'
- 3. Click 'Unzip' to decompress the downloaded file.
- ex.) If the destination is C:Temp, Temp folder on the C drive is made, and the decompressed files are stored in it.
How to uninstall driver software
- When you uninstall driver software, please uninstall it via control panel in reference to 'Uninstalling the Printer Driver in Windows Vista' or 'Uninstalling the Printer Driver in Windows XP' of the supplied install guide.
How to check Version NO.
Sony Up Dr150 Driver Windows 10 32-bit
- 1. Remove the Front panel.
- 2.Press the Menu key, and choose 'VERSION [X.XX]' by pressing Down key.
[X.XX] is the firmware version.
Sony Up-dr150 Driver Windows 10
How to Version Up
[Version Upgrade Procedure]
- (1) Connect the printer and the PC with USB connector.
- (2) Turn ON the printer.
- (3) Double-click the version upgrade file on your PC.
- (4) After the file is extracted, accept the license agreement in the next window.
- (5) Firmware upgrade starts automatically.
Note: Do not turn off the printer during the version upgrade operation when displaying 'Now upgrading...Don't Turn Off!!'